Editing Apple Mouse IIc (section)

=== Component Replacement ===

==== Button Switch ====

'''Original part:''' Omron SS-01-FD
'''Modern equivalent:''' Still available from Mouser
'''Alternative:''' Any compatible 6mm tactile switch

'''Replacement procedure:'''
# Desolder original switch
# Clean PCB pads thoroughly
# Install new switch
# Ensure proper orientation
# Test click action

==== Resistor Networks ====

If identification fails:
# Test resistance values
# Replace if out of specification
# RN1: 10KΩ SIP resistor network
# RN2: 620Ω SIP resistor network
# Verify proper installation

==== Cable Repair ====

'''Common failure points:'''
* Strain relief exit
* Near connector
* Internal wire breaks

'''Repair method:'''
# Identify break location
# Disassemble if internal
# Splice or replace cable
# Ensure proper color coding
# Test all connections