File:Psion Series 5mx printed inner chassis (two-part).jpg
Size of this preview: 727 × 600 pixels. Other resolution: 1,600 × 1,320 pixels.
Original file (1,600 × 1,320 pixels, file size: 183 KB, MIME type: image/jpeg)
Summary
[edit | edit source].jpg&veaction=edit§ion=1){kind=link}
.jpg&action=edit§ion=1){kind=link}
A 3D-printed replacement inner chassis for the Psion Series 5mx, printed as two parts: the chassis tray and a separate hinge spine. Photographed by the designer of the model.
Source
[edit | edit source].jpg&veaction=edit§ion=2){kind=link}
.jpg&action=edit§ion=2){kind=link}
https://makerworld.com/en/models/2928425-psion-5mx-inner-chassis (retrieved 2026-09-30)
Author
[edit | edit source].jpg&veaction=edit§ion=3){kind=link}
.jpg&action=edit§ion=3){kind=link}
ivor.hewitt (MakerWorld). The model is a remix of "Psion 5MX - Internal housing / hinge panel" by Jon on Printables.
Licence
[edit | edit source].jpg&veaction=edit§ion=4){kind=link}
.jpg&action=edit§ion=4){kind=link}
CC BY-NC-SA, as stated on the MakerWorld model page (https://creativecommons.org/licenses/by-nc-sa/4.0/). Non-commercial use only; credit ivor.hewitt.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:23, 30 September 2026 | | 1,600 × 1,320 (183 KB) | Josh (talk | contribs) | Photo of two-part printed 5mx inner chassis, from MakerWorld (CC BY-NC-SA) |
You cannot overwrite this file.
File usage
The following page uses this file:
.jpg&oldid=15268){kind=link}