Editing PDP-11/70 Troubleshooting Guide (section)

== References ==
<references>
<ref name="mm5">Digital Equipment Corporation, ''PDP-11/70 Maintenance and Installation Manual'', EK-11070-MM-002, May 1979, pp. 5-1 to 5-2 ([[:File:PDP-11-70 Maintenance and Installation Manual (EK-11070-MM-002).pdf]]).</ref>
<ref name="mm512">DEC, EK-11070-MM-002, pp. 5-4 to 5-6, sections 5.1.1 and 5.1.2 and Figure 5-1.</ref>
<ref name="mm513">DEC, EK-11070-MM-002, pp. 5-6 to 5-8, section 5.1.3, toggle-in routines.</ref>
<ref name="mm433">DEC, EK-11070-MM-002, pp. 4-104 and 4-106, H7420 fault isolation.</ref>
<ref name="msg">Digital Equipment of Canada, ''1170 Maintenance Service Guide'', KA-K1170-MG-003, April 1988 ([[:File:PDP-11-70 Maintenance Service Guide (KA-K1170-MG-003).pdf]]).</ref>
<ref name="msgd">DEC Canada, KA-K1170-MG-003, pp. 3 to 4, diagnostic order and set-up notes.</ref>
<ref name="msg20">DEC Canada, KA-K1170-MG-003, pp. 20 to 23, field change orders, tech tips and "should've been FCOs".</ref>
<ref name="msgpm">DEC Canada, KA-K1170-MG-003, pp. 126 to 130, annual PM, step 6.</ref>
<ref name="msg145">DEC Canada, KA-K1170-MG-003, p. 145, CPU voltage margins and data path check.</ref>
</references>

[[Category:Digital Equipment Corporation]]
[[Category:Troubleshooting Guides]]