Editing IBM PS/2 Model 80 (section)

== Chassis and Layout ==

The Model 80 chassis is the floor-standing tower introduced with the Model 60:

* '''Height × width × depth''': approx 591 × 165 × 480 mm.
* '''Weight''' (configured): approx 21.3 kg.
* '''Two side panels''' on the tower; the larger side panel (left, when looking at the front) gives access to the MCA riser and planar.
* '''Eight MCA slots''' on a vertical riser: '''1 × 8-bit + 7 × 32-bit'''.
* '''Four drive bays''' stacked vertically in the front of the tower:
*: '''Top bay''': 5.25" full-height (tape backup or second 5.25" device).
*: '''Bay 2''': 3.5" half-height (1.44 MB floppy).
*: '''Bay 3''': 3.5" half-height (ESDI hard drive).
*: '''Bay 4''': 3.5" half-height (spare or second hard drive on server configs).
* '''PSU''': 225 W at the top of the chassis (above the drive cage). Same PSU rating as the 8560-071.
* '''Planar''' mounts on the floor of the chassis.