Editing VAXstation 3100 Troubleshooting Guide (section)

== Common status codes ==
{| class="wikitable styled-table" style="width:100%; text-align:left;"
|+ '''Power-up status messages (DEC, EK-285AA-MG-001, pp. 9 to 10)'''
! Summary line !! Meaning !! Action
|-
| ? E 0040 0000.0005 || Clock not set || Set the time when the operating system is installed; the code clears at the next clock test
|-
| ? D 0050 0000.0005 || NVR battery charge low || Leave the system powered; DEC quotes about 17 hours for a full recharge
|-
| ?? 1 00C0 0000.7004 || ThinWire Ethernet connector not terminated || Fit a terminator or a properly terminated cable
|-
| ?? 1 00C0 0011.700E || Standard Ethernet connector or cable not terminated || Terminate the connector or correct the cable
|}
<ref name="mg9" />

For the NVR, a code of 0000.0001 means no errors. Any code other than 0000.0001 or the low-battery code means the system module must be replaced, since the NVR is on it. If the low-battery code does not clear within an hour of continuous running, check the battery cable, then replace the battery and let it charge for 24 hours.<ref name="mg24" />