Editing Macintosh IIsi Troubleshooting (section)

=== Surface-mount capacitor leakage ===

The Macintosh IIsi logic board uses surface-mount electrolytic capacitors whose electrolyte turns corrosive with age and creeps across the board, eating through traces, pads and IC pins. Typical signatures are a machine that will not chime, chimes but shows no video, plays distorted or missing audio, or shows a garbled or checkerboard screen. Wash the affected area and replace every electrolytic with a tantalum or polymer part, then repair any lifted traces. The switch-mode power supply (ASTEC or TDK on the LC-family machines) holds its own electrolytics and fails the same way, so recap it alongside the board.<ref name="caps">Mac84, [https://mac84.net/web/macintosh-lc-series-lc-lc-ii-lc-iii-power-supply-recapping-guide-astec-usa/ Macintosh LC series power-supply recapping guide]; the [http://www.maccaps.com/MacCaps/Capacitor_Reference/Capacitor_Reference.html MacCaps capacitor reference]; and iFixit. Source for surface-mount electrolytic leakage eating traces, pads and pins, the ASTEC/TDK LC power-supply cap failures, and Apple's use of tantalum (non-leaking) capacitors on the Quadra 700/900 logic boards.</ref>