Editing Apple II General Maintenance (section)

== Storage Guidelines ==

Proper storage prevents deterioration during periods of non-use:

=== Environmental Conditions ===
Optimal storage requires:
* '''Temperature:''' 60-75°F (15-24°C)
* '''Humidity:''' 30-50% relative humidity
* '''Light exposure:''' Avoid direct sunlight and fluorescent lighting
* '''Dust protection:''' Use dust covers or sealed containers

Include silica gel packets in storage containers to control humidity. High humidity accelerates corrosion while low humidity increases static electricity risk.

=== Preparation for Storage ===
Before extended storage:
# '''Clean thoroughly''' inside and out
# '''Remove batteries''' from any peripherals
# '''Apply contact preservative''' to all connectors and card edges
# '''Wrap in anti-static material''' - never use plastic bags
# '''Document condition''' including any known issues
# '''Store vertically''' to minimize board flexing
# '''Include desiccant packets''' for humidity control

=== Reactivation After Storage ===
When returning to service:
# '''Inspect for rodent damage''' to cables and boards
# '''Check for corrosion''' particularly around battery holders
# '''Clean and reseat all chips''' before first power-up
# '''Reform capacitors''' by running for short periods initially
# '''Test voltages''' before connecting to motherboard
# '''Run diagnostics''' to verify proper operation