Editing Commodore VIC-20 Capacitor Replacement Guide (section)

== Post-Recap Voltage Checks ==
{| class="wikitable styled-table" style="width:75%; text-align:center;"
|+'''Expected Rails (No-Cartridge, BASIC Prompt)'''
! Test Point !! Early 324003 !! CR 250403 !! Notes
|-
| +5 V (6502 pin 40) || 4.95 – 5.10 V || 4.95 – 5.10 V || Regulator (early) vs external PSU
|-
| +12 V (VIC pin 28) || 11.6 – 12.6 V || 11.6 – 12.6 V || Derived from 9 VAC doubler
|-
| 9 VAC (cassette port pin 4) || 8.5 – 10.0 V AC || same || Drives tape motor & 12 V doubler
|}

''An oscilloscope should show < 50 mV p-p ripple on +5 V after recap.''