Jump to content
Main menu
Main menu
move to sidebar
hide
Navigation
Main Page
Community portal
Village Pump
Recent changes
Upload file
Help
Help contents
Editing guide
Writing a repair guide
Sandbox
Browse Wiki
Service Manuals
Apple
Nintendo
Sega
Troubleshooting
Search
Search
Appearance
Create account
Log in
Personal tools
Not logged in
Talk
Contributions
Create account
Log in
Editing
Amstrad PC1512 Maintenance Guide
(section)
Page
Discussion
English
Read
Edit
Edit source
View history
Tools
Tools
move to sidebar
hide
Actions
Read
Edit
Edit source
View history
General
What links here
Related changes
Page information
Appearance
move to sidebar
hide
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Checklist for a newly acquired PC1512 == # Remove the AA cells from the tray and clean any leakage. # Open the monitor, discharge the tube and look over the supply section for leaking or bulging electrolytics and cracked solder joints. # Check the 14-way DIN cable and plug for broken wires. # Power the monitor and computer and measure the rails at the DIN plug against the table above. # Clean the floppy drive heads and check the drive select jumpers. # Fit new AA cells and set up the machine with NVR.
Summary:
Other contributors may edit, change or remove anything you write here. Text you write is released under CC BY-SA 4.0 and the GFDL; see the
Terms of Use
.
If you add copyrighted material, such as text or pages from a manual, cite it: give the source, the author or publisher, and the copyright holder. See
RetroTechCollection:Copyrights
.
Cancel
Editing help
(opens in new window)
Search
Search
Editing
Amstrad PC1512 Maintenance Guide
(section)
Add topic
