Jump to content

Super Famicom Maintenance Guide: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

22 September 2026

  • curprev 20:0020:00, 22 September 2026 Josh talk contribs 18,355 bytes +4,494 Re-cite against Nintendo's own service manual instead of a secondary transcription. TC1 alignment corrected: the manual is PAL-M and specifies 21.453666MHz, not the 21.47727/17.734475 figures a secondary source had substituted. Added Nintendo's colour-fault tree, the GPM board changes, the C67 discharge step and a self-inflicted-faults section undo
  • curprev 19:5019:50, 22 September 2026 Josh talk contribs 13,861 bytes +5,682 Rebuild: supply is 10V DC 850mA (HVC-002) not 9V, and the barrel polarity was stated backwards; no 3.3V or 12V rail exists (fullsnes); regulator is U12/U9 not IC601; cap table (C59-C60 220uF audio, C67 470uF, C72, C81) fabricated and contradicted the cap guide; controller port is a proprietary 7-pin not mini-DIN. Added Nintendo Control Deck diagnostic table and Multi Out pinout. F1 1.5A confirmed. Cited; Unverified data cleared undo

21 September 2026

9 August 2025

10 May 2025