Atari 5200 General Maintenance: Revision history

6 October 2026

• curprev 10:4410:44, 6 October 2026 Josh talk contribs 10,378 bytes 0 Set 1 table to 70% width so it sits next to the image undo

30 September 2026

• curprev 23:1223:12, 30 September 2026 Josh talk contribs 10,378 bytes −1,158 Atari's controller tests (console and meter), button pin table, pot alignment per Figs 6-4/6-8 (no clock positions in the manual), disassembly procedure, tech tips; remove invented monthly/annual schedule, storage figures and carbon-pad trick; console navbox; Atari maintenance category undo

23 September 2026

• curprev 04:1804:18, 23 September 2026 Josh talk contribs 11,536 bytes −3,986 Corrected against the CX5200 Field Service Manual: PSU is the CX521 (C018187) 9.3 V DC at 1.95 A, not 9.3 V AC 3.5 A; regulators VR1/VR2 are 78M05 (C014348) not 7805; C45 is 4700 uF 25 V on CA018087 but 47 uF 25 V on CA020108 and CA021374; added Atari's R8 colour and R132 POKEY-adjust calibration targets and the CX52 controller pot/button test limits; noted there was no PAL 5200; removed red-linked related pages and the unsourced 'slot is live when switched off' claim undo

21 September 2025

• curprev 09:5509:55, 21 September 2025 Josh talk contribs 15,522 bytes +10 No edit summary undo Tag: Visual edit
• curprev 09:5409:54, 21 September 2025 Josh talk contribs 15,512 bytes +15,512 Created page with "thumb|Atari 5200 console with RF shielding removed Proper maintenance of the '''Atari 5200 SuperSystem''' requires attention to its unique design challenges, particularly the analog controller system and combined power/RF configurations on 4-port models. Regular maintenance prevents common failures including controller drift, power supply issues, and video degradation. The 5200's architecture, sharing components with the Atari 8-bit compute..." Tag: Visual edit: Switched