Power Macintosh 6100 Capacitor Replacement Guide: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

27 September 2026

23 September 2026

  • curprev 23:3223:32, 23 September 2026 Josh talk contribs 5,674 bytes −1 House style: rephrase the corrections as statements about the figures themselves rather than about this page's own history undo
  • curprev 23:0223:02, 23 September 2026 Josh talk contribs 5,675 bytes +885 Verification drive: capacitor list verified - there is none. Removed the unsourced '10uF to 470uF' logic-board range and the unnamed PSU capacitor list; Apple's 6100 Service Source is module-level and names no capacitor. Replaced the 'wait 24 hours' discharge advice with a real discharge-and-measure instruction undo
  • curprev 01:4701:47, 23 September 2026 Josh talk contribs 4,790 bytes +465 Removed unsourced rail tolerance figures: Apple's Power Macintosh 6100/WS 6150 Service Source publishes no per-rail voltages. Replaced with Apple's actual Electrical spec and a sourced +-5% logic-supply check undo

10 February 2026