RetroTechCollection

Sega Saturn (Model 1) Maintenance Guide: Revision history

View logs for this page

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

23 September 2026

  • curprev 04:5004:50, 23 September 2026 Josh talk contribs 10,989 bytes +3,728 CORRECTIONS from Sega's PAL service manual (hosted): deleted the invented voltage table (+9V orange wire, -12V blue wire) - the Saturn has +9V, +5V and +3.3V and no 12V or negative rail; deleted 'internal linear power supply' (it is a bought-in switching module), the '1000uF/2200uF/470uF 10-25V' PSU capacitor values, the 'Sanyo SF-P101 lens' (Saturn drives are JVC, Hitachi and Sanyo assemblies) and the 'SR44/CR2032' contradiction - Sega's accessories list says CR2032. Replaced 'only adjust th... undo

9 August 2025

9 May 2025

Retrieved from "https://wiki.retrotechcollection.com/Sega_Saturn_(Model_1)_Maintenance_Guide"