IBM PS/ValuePoint Troubleshooting Guide: Difference between revisions

(One intermediate revision by the same user not shown)

Line 1:

[[File:IBM PS-ValuePoint (photo).jpg|thumb|right|300px|IBM PS/ValuePoint. Source: Wikimedia Commons.]]

This guide documents fault diagnosis for the '''[[IBM PS/ValuePoint]]''' family — machine types '''6381 / 6382 / 6384 / 6387''' (1992–1995). PS/ValuePoint inherits the classic IBM PC/PS/2 POST numeric error code series — 161 / 162 / 163 CMOS battery cluster, 2xx memory codes, 6xx floppy codes, 17xx hard disk codes — plus PS/ValuePoint-specific behaviour around the on-planar SVGA, VLB / PCI riser, and ICS-vs-Chrontel video clock generator.

Line 264:

Line 265:

# If POST passes but OS won't load: run Setup, verify boot device, then suspect drive.

# Run the Advanced Diagnostics Diskette for sustained hardware self-test.

== ⚠️ Power-supply RIFA capacitor and tantalum shorts ==

Two age-related failures are near-universal on this era of IBM hardware:

* '''RIFA mains-filter capacitors''' in the power supply are metallised-paper parts that crack and fail '''short''' with age, producing acrid smoke shortly after power-on. Replace them pre-emptively with modern X2-class parts.<ref name="ibm_rifa">[https://www.minuszerodegrees.net/failure.htm minuszerodegrees.net — IBM failure symptoms]; [https://www.classic-computers.org.nz/blog/2010-11-04-restoring-an-IBM-xt.htm Repairing and Restoring an IBM XT]; and [https://retrorepairsandrefurbs.com/2025/05/15/1983-ibm-pc-5160-xt-power-supply-rebuild-modifications/ Adam's Vintage Computer Restorations]. Source for the RIFA mains-filter capacitor failing short (smoke) and the tantalum capacitors failing short and preventing the PSU from firing.</ref>

* '''Tantalum capacitors''' on the planar (system board) and on ISA cards fail short with age. A shorted tantalum will '''prevent the power supply from starting''' (dead machine, PSU protection latched) — look for a cracked or discoloured tantalum and lift suspect ones to find the short.<ref name="ibm_rifa">[https://www.minuszerodegrees.net/failure.htm minuszerodegrees.net — IBM failure symptoms]; [https://www.classic-computers.org.nz/blog/2010-11-04-restoring-an-IBM-xt.htm Repairing and Restoring an IBM XT]; and [https://retrorepairsandrefurbs.com/2025/05/15/1983-ibm-pc-5160-xt-power-supply-rebuild-modifications/ Adam's Vintage Computer Restorations]. Source for the RIFA mains-filter capacitor failing short (smoke) and the tantalum capacitors failing short and preventing the PSU from firing.</ref>

IBM PC/XT switching supplies also need a '''minimum load''' to start, so a bare supply on the bench may not run without a dummy load.<ref name="ibm_rifa">[https://www.minuszerodegrees.net/failure.htm minuszerodegrees.net — IBM failure symptoms]; [https://www.classic-computers.org.nz/blog/2010-11-04-restoring-an-IBM-xt.htm Repairing and Restoring an IBM XT]; and [https://retrorepairsandrefurbs.com/2025/05/15/1983-ibm-pc-5160-xt-power-supply-rebuild-modifications/ Adam's Vintage Computer Restorations]. Source for the RIFA mains-filter capacitor failing short (smoke) and the tantalum capacitors failing short and preventing the PSU from firing.</ref>

== ⚠️ CMOS / RTC battery ==

This machine keeps its configuration in battery-backed CMOS, and the battery is a common failure. On AT-class boards the clock/CMOS is often a '''Dallas DS1287/DS12887''' module with the cell sealed inside; it lasts about ten years and then dies, giving '''161 / 163''' CMOS and clock errors at POST (and sometimes spurious floppy-drive errors). PS/2 planars use a rechargeable barrel or pack battery that '''leaks''' and corrodes the board. Replace a dead Dallas module (or rework it with an external coin cell), and on a leaking planar battery remove it and clean the corrosion before it eats the traces.<ref name="ibm_batt">[https://www.classic-computers.org.nz/blog/2009-10-10-renovating-a-dallas-battery-chip.htm Fixing a Flat Dallas DS1287 RTC], Classic Computers; and [https://www.ardent-tool.com/misc/Dallas_Rework.html Reworking Dallas RTC Modules], Ardent Tool. Source for the Dallas DS1287/DS12887 internal-battery death (161/163 CMOS errors) and the leaking planar battery.</ref>

== References ==

== Related Pages ==

@@ Line 1: / Line 1: @@
+[[File:IBM PS-ValuePoint (photo).jpg|thumb|right|300px|IBM PS/ValuePoint. Source: Wikimedia Commons.]]
 This guide documents fault diagnosis for the '''[[IBM PS/ValuePoint]]''' family — machine types '''6381 / 6382 / 6384 / 6387''' (1992–1995). PS/ValuePoint inherits the classic IBM PC/PS/2 POST numeric error code series — 161 / 162 / 163 CMOS battery cluster, 2xx memory codes, 6xx floppy codes, 17xx hard disk codes — plus PS/ValuePoint-specific behaviour around the on-planar SVGA, VLB / PCI riser, and ICS-vs-Chrontel video clock generator.
@@ Line 264: / Line 265: @@
 # If POST passes but OS won't load: run Setup, verify boot device, then suspect drive.
 # Run the Advanced Diagnostics Diskette for sustained hardware self-test.
+== ⚠️ Power-supply RIFA capacitor and tantalum shorts ==
+Two age-related failures are near-universal on this era of IBM hardware:
+* '''RIFA mains-filter capacitors''' in the power supply are metallised-paper parts that crack and fail '''short''' with age, producing acrid smoke shortly after power-on. Replace them pre-emptively with modern X2-class parts.<ref name="ibm_rifa">[https://www.minuszerodegrees.net/failure.htm minuszerodegrees.net — IBM failure symptoms]; [https://www.classic-computers.org.nz/blog/2010-11-04-restoring-an-IBM-xt.htm Repairing and Restoring an IBM XT]; and [https://retrorepairsandrefurbs.com/2025/05/15/1983-ibm-pc-5160-xt-power-supply-rebuild-modifications/ Adam's Vintage Computer Restorations]. Source for the RIFA mains-filter capacitor failing short (smoke) and the tantalum capacitors failing short and preventing the PSU from firing.</ref>
+* '''Tantalum capacitors''' on the planar (system board) and on ISA cards fail short with age. A shorted tantalum will '''prevent the power supply from starting''' (dead machine, PSU protection latched) &mdash; look for a cracked or discoloured tantalum and lift suspect ones to find the short.<ref name="ibm_rifa">[https://www.minuszerodegrees.net/failure.htm minuszerodegrees.net — IBM failure symptoms]; [https://www.classic-computers.org.nz/blog/2010-11-04-restoring-an-IBM-xt.htm Repairing and Restoring an IBM XT]; and [https://retrorepairsandrefurbs.com/2025/05/15/1983-ibm-pc-5160-xt-power-supply-rebuild-modifications/ Adam's Vintage Computer Restorations]. Source for the RIFA mains-filter capacitor failing short (smoke) and the tantalum capacitors failing short and preventing the PSU from firing.</ref>
+IBM PC/XT switching supplies also need a '''minimum load''' to start, so a bare supply on the bench may not run without a dummy load.<ref name="ibm_rifa">[https://www.minuszerodegrees.net/failure.htm minuszerodegrees.net — IBM failure symptoms]; [https://www.classic-computers.org.nz/blog/2010-11-04-restoring-an-IBM-xt.htm Repairing and Restoring an IBM XT]; and [https://retrorepairsandrefurbs.com/2025/05/15/1983-ibm-pc-5160-xt-power-supply-rebuild-modifications/ Adam's Vintage Computer Restorations]. Source for the RIFA mains-filter capacitor failing short (smoke) and the tantalum capacitors failing short and preventing the PSU from firing.</ref>
+== ⚠️ CMOS / RTC battery ==
+This machine keeps its configuration in battery-backed CMOS, and the battery is a common failure. On AT-class boards the clock/CMOS is often a '''Dallas DS1287/DS12887''' module with the cell sealed inside; it lasts about ten years and then dies, giving '''161 / 163''' CMOS and clock errors at POST (and sometimes spurious floppy-drive errors). PS/2 planars use a rechargeable barrel or pack battery that '''leaks''' and corrodes the board. Replace a dead Dallas module (or rework it with an external coin cell), and on a leaking planar battery remove it and clean the corrosion before it eats the traces.<ref name="ibm_batt">[https://www.classic-computers.org.nz/blog/2009-10-10-renovating-a-dallas-battery-chip.htm Fixing a Flat Dallas DS1287 RTC], Classic Computers; and [https://www.ardent-tool.com/misc/Dallas_Rework.html Reworking Dallas RTC Modules], Ardent Tool. Source for the Dallas DS1287/DS12887 internal-battery death (161/163 CMOS errors) and the leaking planar battery.</ref>
+== References ==
+<references />
 == Related Pages ==