Macintosh Performa 5400 General Maintenance: Difference between revisions
Verification drive: removed the +5/+12/+3.3 V rail table (the first two lines are Apple's Macintosh Plus procedure; the 3.3 V line had no source at all); battery replace-below is Apple's 3.0 V and the pack is a 4.5 V Rayovac on a connector behind the logic board; added Apple's 29.5 V +/- 0.1 V high-voltage adjustment at D713/D703 via VR501/VR702, the separate CRT-video-board geometry controls, PSU/analogue board part numbers and the electrical spec |
House style: rephrase the corrections as statements about the figures themselves rather than about this page's own history |
||
| Line 41: | Line 41: | ||
'''3.0 V is Apple's published threshold for this machine.''' Apple gives no replacement | '''3.0 V is Apple's published threshold for this machine.''' Apple gives no replacement | ||
interval | interval at all, so a fixed "every three to five years" is somebody's guess rather than a | ||
Replace on measurement, or when the machine starts losing its date and startup-disk setting. | specification. Replace on measurement, or when the machine starts losing its date and | ||
startup-disk setting. | |||
=== Cleaning Battery Leakage === | === Cleaning Battery Leakage === | ||
| Line 147: | Line 148: | ||
* '''Power:''' 220 W maximum for all line and load conditions | * '''Power:''' 220 W maximum for all line and load conditions | ||
'''The rail table | '''The rail table "+5 V 4.85–5.15 V, +12 V 11.9–12.7 V, +3.3 V 3.2–3.4 V" does not belong to | ||
+12 V 11.9–12.7 V, +3.3 V 3.2–3.4 V". The first two lines are Apple's '''Macintosh Plus''' | this machine.''' The first two lines are Apple's '''Macintosh Plus''' adjustment procedure — | ||
adjustment procedure — genuine there, with test cable 077-0135 and an upper bound of | genuine there, with test cable 077-0135 and an upper bound of 12.75 V — transplanted onto | ||
12.75 V — transplanted onto | machines that have no such procedure. No source of any kind has been found for the +3.3 V | ||
line. Apple publishes no per-rail tolerance and no power-supply adjustment for the 5400; the | |||
5400; the 29.5 V high-voltage adjustment above is the only one it documents. | 29.5 V high-voltage adjustment above is the only one it documents. | ||
== References == | == References == | ||