Commodore 64 Capacitor Replacement Guide: Difference between revisions

@@ Line 3: / Line 3: @@
 '''Every value on this page is taken from Commodore's own parts lists''' in the [[Commodore C64 Service Manual|C64 / C64C Service Manual]] (March 1992).<ref name="sm">Commodore Business Machines, C64 / C64C Service Manual, March 1992, hosted at [[Commodore 64 / 64C Service Manual]]. Component-level parts lists give capacitance, voltage rating, tolerance and Commodore part number for every capacitor on each mainboard revision, and the manual carries Commodore's own symptom-to-component troubleshooting table.</ref> Cross-check against your own board's silkscreen before ordering — Commodore changed values between revisions, and boards were built with substitutions.
-== ⚠️ A correction ==
-An earlier version of this page listed '''C88 as 4700 µF 16 V, C90 as 1000 µF 16 V and C91 as 470 µF 25 V'''. '''None of those values appears in any Commodore parts list''', the roles were transposed, and the voltage ratings were specified '''below''' the rails those capacitors sit on. If you recapped a C64 from this page before September 2026, check what you fitted against the tables below.
 == Which board do you have? ==