IBM Fixed Disk Adapter: Difference between revisions

IBM Fixed Disk Adapter
Manufacturer	IBM (manufactured under contract by Xebec)
Type	8-bit ISA MFM hard disk controller card
Release date	March 1983 (with PC XT)
Interface	8-bit ISA; ST-506 / ST-412 to drive
Compatible	IBM PC XT (5160); IBM PC (5150) with 130 W Type 2 PSU
Connectivity	34-pin control ribbon (daisy-chained); 20-pin data ribbon (one per drive)

← Older edit

VisualWikitext

Latest revision as of 10:26, 21 May 2026

The IBM Fixed Disk Adapter (often called the IBM XT MFM controller) is the 8-bit ISA hard disk controller IBM shipped with the IBM PC XT (5160) and offered as an upgrade for late-production 5150s fitted with the 130 W Type 2 power supply. It supports MFM-encoded 5.25" full-height hard disk drives — typically a 10 MB Seagate ST-412 or a 20 MB ST-225 — through a separate data ribbon and a per-drive control ribbon.

According to minuszerodegrees.net, there were three documented variants of the card. The earliest variant dates to circa 1983; another variant dates to circa 1984; a third variant from circa 1986 added support for 20 MB drives fitted to later 5160s.

Hardware

Xebec OEM design — branded "IBM" but manufactured under contract by Xebec.
ST-506 / ST-412 interface — MFM encoding at 5 Mbit/s.
BIOS expansion ROM at address C8000 — contains a drive table for IBM-supported drive types.
Two ribbon connectors — 34-pin control (daisy-chained to both drives) and 20-pin data (one cable per drive).

BIOS Expansion ROM

The card carries a BIOS expansion ROM at C8000. The 5150's POST scans for valid BIOS ROMs and runs any whose first three bytes match the AA 55 length signature. If the C8000 ROM is corrupted (except for its first two bytes), the 10/27/82 BIOS beeps the "1 long + 2 short" pattern instead of the expected "C800 ROM" on-screen message — this is a documented BIOS bug.

Common Faults

"1701" error at POST — the controller cannot communicate with the drive. Suspect: ribbon cable orientation, dead drive, failed controller logic.
C8000 ROM corruption — see above. Replace the expansion ROM.
Drive spins but never seeks — stepper motor stuck (lubricate), or stepper driver failed on the drive.
Random read errors — heads need alignment, or the MFM data separator on the controller has drifted.

Drive Compatibility

The IBM Fixed Disk Adapter will work with most ST-506/412 MFM drives if you have a drive table that matches, but the stock IBM ROM only supports a handful of drive types. Modern replacements (XT-IDE Universal BIOS, ZuluSCSI / MFM emulator) provide alternatives that bypass the original BIOS limitations.

References

IBM/Xebec Fixed Disk Adapter, minuszerodegrees.net.
IBM Personal Computer 20MB Fixed Disk Drive Adapter + ROM BIOS Source, Internet Archive.

Related Pages

@@ Line 1: / Line 1: @@
 {{Infobox computer peripheral
 | name          = IBM Fixed Disk Adapter
-| image         = [[File:IBM Fixed Disk Adapter placeholder.png|260px]]
+| manufacturer  = IBM (manufactured under contract by Xebec)
-| caption       = The IBM (Xebec) Fixed Disk Adapter, 8-bit ISA MFM hard disk controller with 8 KB BIOS expansion ROM at C8000
+| type          = 8-bit ISA MFM hard disk controller card
-| manufacturer  = IBM (manufactured by Xebec)
-| type          = ISA MFM hard disk controller card
 | release_date  = March 1983 (with [[IBM PC XT (5160)|PC XT]])
-| discontinued  = ~1987
+| interface     = 8-bit ISA; ST-506 / ST-412 to drive
-| interface     = 8-bit ISA (PC bus); ST-506 / ST-412 to drive
 | compatible    = [[IBM PC XT (5160)]]; [[IBM PC (5150)]] with 130 W Type 2 PSU
 | connectivity  = 34-pin control ribbon (daisy-chained); 20-pin data ribbon (one per drive)
-| model         = IBM Fixed Disk Adapter / 6181682
-| part_number   = 6181682
 }}
-The '''IBM Fixed Disk Adapter''' (often called the '''IBM XT MFM controller''') is the 8-bit ISA hard disk controller IBM shipped with the [[IBM PC XT (5160)]] and offered as an upgrade for late-production [[IBM PC (5150)|5150]]s fitted with the 130 W Type 2 power supply. It supports one or two MFM-encoded 5.25" full-height hard disk drives — typically a 10 MB or 20 MB Seagate ST-225 — through a separate data ribbon and a per-drive control ribbon.
+The '''IBM Fixed Disk Adapter''' (often called the '''IBM XT MFM controller''') is the 8-bit ISA hard disk controller IBM shipped with the [[IBM PC XT (5160)]] and offered as an upgrade for late-production [[IBM PC (5150)|5150]]s fitted with the 130 W Type 2 power supply. It supports MFM-encoded 5.25" full-height hard disk drives — typically a 10 MB Seagate ST-412 or a 20 MB ST-225 — through a separate data ribbon and a per-drive control ribbon.
+According to minuszerodegrees.net, there were three documented variants of the card. The earliest variant dates to circa 1983; another variant dates to circa 1984; a third variant from circa 1986 added support for 20 MB drives fitted to later 5160s.
 == Hardware ==
@@ Line 20: / Line 17: @@
 * '''Xebec OEM design''' — branded "IBM" but manufactured under contract by Xebec.
 * '''ST-506 / ST-412 interface''' — MFM encoding at 5 Mbit/s.
-* '''Drive types''' — IBM-supplied BIOS expansion ROM at address C8000 contains a 4-entry drive table. The default type 1 is the 10 MB ST-412; type 2 is the 20 MB ST-225. Tables for other drives (e.g. Tandon TM-262, NEC D5126) are not present in the IBM ROM.
+* '''BIOS expansion ROM at address C8000''' — contains a drive table for IBM-supported drive types.
 * '''Two ribbon connectors''' — 34-pin control (daisy-chained to both drives) and 20-pin data (one cable per drive).
 == BIOS Expansion ROM ==
-The card carries an 8 KB BIOS expansion ROM at C8000. The 5150's POST scans for valid BIOS ROMs at 2 KB intervals from C0000 to F4000 and runs the initialisation routine in any ROM whose first three bytes match the AA 55 ''length'' signature. If the C8000 ROM is corrupted (except for its first two bytes), the [[IBM PC (5150)#Memory and ROM|10/27/82 BIOS]] beeps the 1 long + 2 short "video failure" pattern instead of the expected "C800 ROM" on-screen message — this is a documented BIOS bug.
+The card carries a BIOS expansion ROM at C8000. The 5150's POST scans for valid BIOS ROMs and runs any whose first three bytes match the AA 55 ''length'' signature. If the C8000 ROM is corrupted (except for its first two bytes), the [[IBM PC (5150)#Memory and ROM|10/27/82 BIOS]] beeps the "1 long + 2 short" pattern instead of the expected "C800 ROM" on-screen message — this is a documented BIOS bug.
 == Common Faults ==
@@ Line 32: / Line 29: @@
 * '''C8000 ROM corruption''' — see above. Replace the expansion ROM.
 * '''Drive spins but never seeks''' — stepper motor stuck (lubricate), or stepper driver failed on the drive.
-* '''Random read errors''' — heads need alignment, or the MFM data separator on the controller has drifted. Recapping the analog board often helps.
+* '''Random read errors''' — heads need alignment, or the MFM data separator on the controller has drifted.
 == Drive Compatibility ==
-The IBM Fixed Disk Adapter will work with most ST-506/412 MFM drives if you have a drive table that matches, but the stock IBM ROM only supports a handful of drive types. The third-party '''XT-IDE Universal BIOS''' and modern replacements like the '''ZuluSCSI''' / '''MFM emulator''' provide modern alternatives that bypass the original BIOS limitations.
+The IBM Fixed Disk Adapter will work with most ST-506/412 MFM drives if you have a drive table that matches, but the stock IBM ROM only supports a handful of drive types. Modern replacements (XT-IDE Universal BIOS, ZuluSCSI / MFM emulator) provide alternatives that bypass the original BIOS limitations.
+== References ==
+* [https://minuszerodegrees.net/ibm_xebec/ibm_xebec.htm IBM/Xebec Fixed Disk Adapter], minuszerodegrees.net.
+* [https://archive.org/details/ibm-fixed-drive-adapter-xebec-mfm-bios-rom-source IBM Personal Computer 20MB Fixed Disk Drive Adapter + ROM BIOS Source], Internet Archive.
 == Related Pages ==

Josh (talk | contribs)