Apple Lisa 2: Difference between revisions

Collapse duplicated <ref name=...> definitions to a single definition with the rest self-closing (duplicate definitions render as a visible red cite error)
House rule: reword in-article correction narratives so they describe the claim in circulation and what the source says, rather than the page's own edit history. The corrections themselves are recorded in the edit summaries
 
Line 107: Line 107:
|}
|}


'''Maximum data rates and an AppleTalk capability were previously tabulated here and are not
'''Maximum data rates and an AppleTalk capability were sometimes tabulated for it and are not
supported by anything held on this wiki.''' The Lisa has no AppleTalk hardware; its serial ports
supported by anything held on this wiki.''' The Lisa has no AppleTalk hardware; its serial ports
are RS-232. The figures have been removed.
are RS-232. The figures have been removed.
Line 169: Line 169:
A further check: '''the Lisa 2/10 I/O board has no switch''' where the earlier boards do.<ref name="lisal1" />
A further check: '''the Lisa 2/10 I/O board has no switch''' where the earlier boards do.<ref name="lisal1" />


Serial-number prefix ranges previously listed here could not be traced to any Apple document and
Serial-number prefix ranges sometimes listed for it could not be traced to any Apple document and
have been removed.
have been removed.


Line 261: Line 261:


'''There are no codes in the 10s, and none between 60 and 70.''' A banded table of the form
'''There are no codes in the 10s, and none between 60 and 70.''' A banded table of the form
"10–19 = CPU board, 20–29 = I/O board" was previously published here and is not Apple's: 22,
"10–19 = CPU board, 20–29 = I/O board" circulates for this machine and is not Apple's: 22,
23 and 25 are diskette-handling failures, and the CPU-board codes are 40–49.<ref name="lisal1" />
23 and 25 are diskette-handling failures, and the CPU-board codes are 40–49.<ref name="lisal1" />


Line 303: Line 303:
   Level 1 procedures cover video adjustments — horizontal phase, brightness and contrast, yoke
   Level 1 procedures cover video adjustments — horizontal phase, brightness and contrast, yoke
   and trim magnets — and nothing else.<ref name="lisal1" /> Designators for "+5 V" and "+12 V" adjustment
   and trim magnets — and nothing else.<ref name="lisal1" /> Designators for "+5 V" and "+12 V" adjustment
   potentiometers were previously given here; they are not in any Apple document held and have
   potentiometers circulate for this machine; they are not in any Apple document held and have
   been removed rather than left for someone to turn.
   been removed rather than left for someone to turn.
* Apple's video repair table lists '''"a sizzling noise coming from Lisa"''' and '''"power supply
* Apple's video repair table lists '''"a sizzling noise coming from Lisa"''' and '''"power supply