Macintosh Pascal Moll-Folsom 1985
Macintosh Pascal by Moll and Folsom, Houghton Mifflin Company, Boston; © THINK Technologies, Inc., 1985, ISBN 0-395-37574-6, Library of Congress catalog card 84-81937. The scan is 505 pages.
What it covers
An introduction to Macintosh Pascal. The scan opens with a useful endpaper: a table of Macintosh Pascal standard procedures cross-referenced to the section of the book that explains each — close, delete, drawchar, drawline, eraseoval, eraserect, frameoval, framerect, open, paintcircle, paintoval, paintrect, pensize, read, readln, reset and so on.
The copyright is held by THINK Technologies, the company behind THINK Pascal and THINK C, which places this book in the same lineage as the later Symantec titles held here.
This is not a repair source
This is a programming book. It contains no schematics, no parts lists, no component values, no voltages, no connector pinouts and no service procedures, and nothing in it should be cited for a hardware figure. Apple's software documentation and its compiler manuals describe the machine as the programmer sees it, which is not the machine the technician sees.
For hardware data use:
- Apple Service Source — Apple's own service manuals, module
level: specifications, symptom charts, take-apart and module part numbers
- Apple's Developer Notes — the one class of Apple developer document that does carry
rail currents, expansion-slot power budgets and connector pinouts. Several are held here, for example Macintosh IIci Developer Note, Macintosh IIsi Developer Note and Macintosh LC 475 and Quadra 605 Developer Note.
- Macintosh Repair & Upgrade Secrets and The Dead Mac Scrolls — component-level, for
the compact Macs
Related documents held here
- Macintosh Pascal Carmony-Holliday 1985 — the other book of the same title held here
- Structured Programming Using Think Pascal On The Macintosh 1992
- Programming in Macintosh and Think Pascal 1995
Download: Macintosh_Pascal_Moll-Folsom_1985.pdf (108.4 MB)