Jump to content

Easy Object Programming 1993

From RetroTechCollection
Revision as of 02:28, 25 September 2026 by Josh (talk | contribs) (P4 verification: real documentation page - full printed title, author, publisher, year, ISBN and page count, with the page-title errors recorded and an explicit statement that it is not a repair source)

Easy Object Programming for the Macintosh Using AppMaker and THINK C by Richard O. Parker. Prentice Hall, Englewood Cliffs, New Jersey, © 1993, ISBN 0-13-092966-2. 515 pages in this scan.

AppMaker was a Macintosh interface builder that generated THINK C or THINK Pascal source from a drawn interface; this book teaches object programming through it. A disk was included with the printed book and is not part of this scan.

Not a repair source. This is a software book: no schematic, no parts list, no component value, no voltage and no fault-finding procedure for any machine. Nothing on this wiki should cite it for a hardware figure.

Download here: Easy_Object_Programming_1993.pdf

Retrieved from "https://wiki.retrotechcollection.com/index.php?title=Easy_Object_Programming_1993&oldid=13602"