Technical Instroduction To The Macintosh Family 1987

'The page title is misspelt. The printed title is Apple Technical Introduction to the Macintosh Family — "Introduction", not "Instroduction". It is Apple's own book', © 1987 Apple Computer, published by Addison-Wesley, ISBN 0-201-17765-X, 303 pages.

What it covers

Apple's own technical overview of the Macintosh family as it stood in 1987 — the 512K enhanced, Plus, SE and II — describing the processor, memory, the ROM and Toolbox, the file system, printing, networking and the expansion architecture (NuBus is credited to Texas Instruments on the copyright page).

It is the highest-level of Apple's Inside Macintosh family of documents and is written to orient a developer, not to serve a technician.

This is not a repair source

This is a programming book. It contains no schematics, no parts lists, no component values, no voltages, no connector pinouts and no service procedures, and nothing in it should be cited for a hardware figure. Apple's software documentation and its compiler manuals describe the machine as the programmer sees it, which is not the machine the technician sees.

For hardware data use:

Apple Service Source — Apple's own service manuals, module

 level: specifications, symptom charts, take-apart and module part numbers

Apple's Developer Notes — the one class of Apple developer document that does carry

 rail currents, expansion-slot power budgets and connector pinouts. Several are held here, for
 example Macintosh IIci Developer Note, Macintosh IIsi Developer Note and
 Macintosh LC 475 and Quadra 605 Developer Note.

Macintosh Repair & Upgrade Secrets and The Dead Mac Scrolls — component-level, for

 the compact Macs

What it covers

This is not a repair source

Related documents held here