Apple Graphics Tablet Technical Procedures
The Graphics Tablet Technical Procedures are the Apple Graphics Tablet section of Apple's Apple Service Technical Procedures: Apple II/Apple III Archived Products, Volume Two (part number 072-0231). The section has 26 pages, with revisions dated August 1983 to July 1985 (contents page rev. Apr 85), and a text layer.
Contents
[edit | edit source]From the section's table of contents:
- Section 1, Apple IIe Installation (pp. 1.3 to 1.5)
- Section 2, Apple II or II Plus Installation (pp. 2.3 to 2.8): internal cables, connector clamp and connector card
- Section 3, Troubleshooting: symptom table (p. 3.3), pen alignment with the Apple II Products Diagnostic diskette 077-0100 and the L2 coil (p. 3.4), checking the tablet (p. 3.5)
- Section 4, Upgrading from Non-RFI to RFI (pp. 4.2 to 4.3): parts and part numbers for converting an A2M0029 tablet, including the interface card R1 change from 470 ohms to 75 ohms
- Section 5, Illustrated Parts List and diagrams (p. 5.2)
What this document does not contain
[edit | edit source]Service level only: no schematic of the tablet or of the interface card. The card schematic is Apple Graphics Tablet Interface Card Schematic (050-0020-02).
Pages that cite this document
[edit | edit source]- Apple Graphics Tablet: cites Section 1, pp. 1.3-1.6, Section 2, pp. 2.3-2.8, Section 3