File:Atari Stacy Schematics and Drawing Package.pdf

Atari STacy (LST) schematics and drawing package, Atari Corporation, 1989–1990. Forty-nine sheets.

The engineering drawing set for the Atari Stacy portable computer, which Atari referred to internally as the LST (Laptop ST). Contents include:

• CA200464-XXX ASSY PCB LST, sheets 1–9 — the complete bill of material for the Stacy main board, with reference designators, descriptions and Atari part numbers for every capacitor, resistor, IC, socket and connector, including the lithium clock battery at location LB.
• CA200528-XXX ASSY SUB PCB LST-4, sheets 1–6 — the bill of material for the sub board.
• CA200478-XXX ASSY LED PCB LST — the LED/indicator board.
• CA200470-XXX ASSY DRIVE LST — floppy and hard-disk drive mounting assemblies.
• C103641-XXX — the approved-vendor list and packaging drawing for the 1 M × 1 CMOS ZIP DRAM used in the Stacy.
• Main-board circuit diagrams, and the power board schematic, which states the board's DC input range.
• The LCD interface and low-battery sheets.

This is the primary source for the Stacy component values and designators cited on the RetroTechCollection Stacy pages.

Rebuilt as a page-image PDF from the Internet Archive item Atari_STacy_Schematics_smaller_PDF_file; the original scan is approximately 98 MB, which is impractical to host. Page content is unaltered.

Copyright © 1989–1990 Atari Corporation. All rights reserved. No licence has ever been granted for redistribution. It is hosted here for the preservation and repair of obsolete hardware that has had no manufacturer support for over three decades. If you hold the rights to this document and want it removed, please contact the wiki operator.