Editing IBM PC AT Troubleshooting Guide (section)

== ⚠️ CMOS / RTC battery ==

This machine keeps its configuration in battery-backed CMOS, and the battery is a common failure. On AT-class boards the clock/CMOS is often a '''Dallas DS1287/DS12887''' module with the cell sealed inside; it lasts about ten years and then dies, giving '''161 / 163''' CMOS and clock errors at POST (and sometimes spurious floppy-drive errors). PS/2 planars use a rechargeable barrel or pack battery that '''leaks''' and corrodes the board. Replace a dead Dallas module (or rework it with an external coin cell), and on a leaking planar battery remove it and clean the corrosion before it eats the traces.<ref name="ibm_batt">[https://www.classic-computers.org.nz/blog/2009-10-10-renovating-a-dallas-battery-chip.htm Fixing a Flat Dallas DS1287 RTC], Classic Computers; and [https://www.ardent-tool.com/misc/Dallas_Rework.html Reworking Dallas RTC Modules], Ardent Tool. Source for the Dallas DS1287/DS12887 internal-battery death (161/163 CMOS errors) and the leaking planar battery.</ref>