Jump to content

Macintosh Classic II Capacitor Replacement Guide: Revision history

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

23 September 2026

  • curprev 00:1900:19, 23 September 2026 Josh talk contribs 15,550 bytes +6,907 Verification drive: SAFETY FIX - the single analogue-board table mixed the 120V and 240V board variants. It listed CP1 AND CP13 at 220uF 250V (the 120V voltage-doubler pair) alongside CL1/CL11/CV2, which are 240V-board parts. On a 240V board CP1 is 220uF 400V and CP13 is a jumper with no capacitor; 240V mains rectifies to ~340V DC, so a 250V part there fails violently. Split into separate 120V and 240V tables per console5 630-0560, cross-checked against Recap-a-Mac 240V photo guide. Added con... undo

21 September 2026

28 September 2025

12 May 2025

19 April 2025