Jump to content

Sega Game Gear TV Tuner PAL Service Manual: Difference between revisions

From RetroTechCollection

Josh (talk | contribs)

8 user groups
16,211 edits
undo
VisualWikitext
Created Game Gear TV Tuner service manual page
 
Complete contents list; add system voltage figures and troubleshooting test points; correct alignment description and designator note; remove self-reference and bold labels
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
<templatestyles src="Template:StyledTable/styles.css" />
The '''Service Manual for the TV Tuner Pack (PAL) for Game Gear''' is a 36-page service manual for the Game Gear TV Tuner, which plugs into the Game Gear's cartridge slot. The scan has a text layer. The manual names no publisher; its parts list gives Sega as the maker of the case parts, and its part codes (A01-, W22-, A86-) do not follow Sega's own numbering. It covers three PAL models: MK-2101-05 (system I, England), MK-2101-18 (B/G, Germany) and MK-2101-20 (B/G, general Europe).
The general specifications on the first page give reception of VHF channels 1 to 12 and UHF 21 to 69, operation from +5 °C to +40 °C, storage from −20 °C to +60 °C, dimensions of 107.2 (H) × 120 (W) × 39 (D) mm and a weight of 140 g without batteries.
== Contents ==
{| class="wikitable styled-table" style="width:80%; text-align:left;"
|+'''Contents, with the manual's page numbers'''
! Section !! Page
|-
| Specifications || 1
|-
| Disassembly and assembly procedure || 4
|-
| Block diagram || 6
|-
| Adjustment and alignment: general description || 7
|-
| 1. System voltage inspection (PCB-2) || 8
|-
| 2. Video IF alignment and AFT alignment (PCB-2) || 9
|-
| 3. RF AGC delay alignment (PCB-2) || 10
|-
| 4. Tuning dial calibration (PCB-2) || 11
|-
| 5. Gradation alignment and brightness alignment (PCB-1) || 12
|-
| 6. PLL alignment (PCB-1) || 13
|-
| 7. RGB phase alignment || 14
|-
| Troubleshooting chart and check charts || 15
|-
| PCB top and bottom views || 23
|-
| Electrical parts list || 31
|-
| Exploded view parts list || 36
|-
| Exploded view || 37
|-
| Schematic diagrams, PCB-1 and PCB-2 || 39
|}
== What this manual settles ==
* The tuner has two boards: PCB-1, the video board, and PCB-2, the TV receiver board, joined by a flexible flat cable to connector K401. Capacitor and resistor designators are grouped by circuit block, 1xx, 2xx and 4xx on PCB-2 and 7xx and 8xx on PCB-1.
* Sega says the adjustments are needed only after particular components have been replaced, and lists the control for each: L201 and L202 for video IF and AFT, VR201 and VR202 for RF AGC delay, VR1 to VR4 for the tuning dial, and trimmers on PCB-1 for gradation, RGB phase (TC701) and PLL (TC801).
* The system voltage inspection gives go/no-go figures. With 5.0 V and 34.0 V fed to K401, TP401 should read 4.5 V ± 0.2 V and TP404 32.0 V ± 1.0 V.
* The troubleshooting chart starts from a 9.0 V supply at the Game Gear's power jack and checks for about 0.65 V peak-to-peak video at TP207 on PCB-2. Its power supply check names L401, C410, R405, Z401 and C409 when the 32 V at TP404 is missing.
* The disassembly needs a special screwdriver for two of the screws (502), which Sega describes as "for LH2".
== What this manual does not contain ==
* NTSC tuner models.
* The Game Gear itself; see [[Sega Game Gear Maintenance Manual (1992)]] and [[Sega Game Gear VA1 Service Manual]].
== Related documents ==
* [[Sega Game Gear Maintenance Manual (1992)]]: its accessories list names the three TV Tuner models.
* [[Sega Game Gear VA1 Service Manual]]
<pdf> File:Sega Game Gear TV Tuner PAL Service Manual.pdf </pdf>
<pdf> File:Sega Game Gear TV Tuner PAL Service Manual.pdf </pdf>


The '''Sega Game Gear TV Tuner Pack PAL Service Manual''' covers the MK-2101 TV Tuner Pack accessory for the Sega Game Gear (PAL region).
Download: [[:File:Sega Game Gear TV Tuner PAL Service Manual.pdf|Sega Game Gear TV Tuner PAL Service Manual.pdf]]
 
== Download ==
Download here: [[:File:Sega Game Gear TV Tuner PAL Service Manual.pdf]]


[[Category:Sega Service Manuals]]
[[Category:Sega Service Manuals]]
[[Category:Service Manuals]]

Latest revision as of 11:06, 1 October 2026

The Service Manual for the TV Tuner Pack (PAL) for Game Gear is a 36-page service manual for the Game Gear TV Tuner, which plugs into the Game Gear's cartridge slot. The scan has a text layer. The manual names no publisher; its parts list gives Sega as the maker of the case parts, and its part codes (A01-, W22-, A86-) do not follow Sega's own numbering. It covers three PAL models: MK-2101-05 (system I, England), MK-2101-18 (B/G, Germany) and MK-2101-20 (B/G, general Europe).

The general specifications on the first page give reception of VHF channels 1 to 12 and UHF 21 to 69, operation from +5 °C to +40 °C, storage from −20 °C to +60 °C, dimensions of 107.2 (H) × 120 (W) × 39 (D) mm and a weight of 140 g without batteries.

Contents

[edit | edit source]
Contents, with the manual's page numbers
Section Page
Specifications 1
Disassembly and assembly procedure 4
Block diagram 6
Adjustment and alignment: general description 7
1. System voltage inspection (PCB-2) 8
2. Video IF alignment and AFT alignment (PCB-2) 9
3. RF AGC delay alignment (PCB-2) 10
4. Tuning dial calibration (PCB-2) 11
5. Gradation alignment and brightness alignment (PCB-1) 12
6. PLL alignment (PCB-1) 13
7. RGB phase alignment 14
Troubleshooting chart and check charts 15
PCB top and bottom views 23
Electrical parts list 31
Exploded view parts list 36
Exploded view 37
Schematic diagrams, PCB-1 and PCB-2 39

What this manual settles

[edit | edit source]
  • The tuner has two boards: PCB-1, the video board, and PCB-2, the TV receiver board, joined by a flexible flat cable to connector K401. Capacitor and resistor designators are grouped by circuit block, 1xx, 2xx and 4xx on PCB-2 and 7xx and 8xx on PCB-1.
  • Sega says the adjustments are needed only after particular components have been replaced, and lists the control for each: L201 and L202 for video IF and AFT, VR201 and VR202 for RF AGC delay, VR1 to VR4 for the tuning dial, and trimmers on PCB-1 for gradation, RGB phase (TC701) and PLL (TC801).
  • The system voltage inspection gives go/no-go figures. With 5.0 V and 34.0 V fed to K401, TP401 should read 4.5 V ± 0.2 V and TP404 32.0 V ± 1.0 V.
  • The troubleshooting chart starts from a 9.0 V supply at the Game Gear's power jack and checks for about 0.65 V peak-to-peak video at TP207 on PCB-2. Its power supply check names L401, C410, R405, Z401 and C409 when the 32 V at TP404 is missing.
  • The disassembly needs a special screwdriver for two of the screws (502), which Sega describes as "for LH2".

What this manual does not contain

[edit | edit source]
[edit | edit source]

Download: Sega Game Gear TV Tuner PAL Service Manual.pdf

Retrieved from "https://wiki.retrotechcollection.com/index.php?title=Sega_Game_Gear_TV_Tuner_PAL_Service_Manual&oldid=17510"