Logo and more for the Commodore 64
Logo and More for the Commodore 64 by Richard Lambert, illustrated by Anita Jones is an educational book for the Commodore 64, 133 pages, published by dilithium Press, Beaverton, Oregon, 1984.
An introduction to the LOGO language, with instructions for use.
What this book is not
It is an educational book, not a service document. It carries no schematics, no parts list, no component values and no board layouts, and it is not a source for a repair figure. Citing it for a capacitor value, a voltage rating or a chip location would be citing the wrong kind of document.
For component-level data on the machine use Commodore's own documentation instead:
- Commodore 64 / 64C Service Manual — parts lists, board identification and schematics for every mainboard revision
- Commodore 64 Technical Manual and Parts List — the drawing package, P/N 990439
- Commodore 64 Capacitor Replacement Guide — the wiki's component list, built from those two
Other books hosted here
This is one of 60 Commodore books on this wiki. See Category:Commodore Books for the annotated index, which groups them by what they are for and marks the handful that do carry hardware data.
Download Logo and more for the Commodore 64 here: dilithiumPress Logo and more for the Commodore 64.pdf