Floppy Drive Repair: Difference between revisions
Update links to Osborne Field Service Manual (Revision 2.0) after page move |
Update links to Service Support Training Programs LaserWriter Technical Procedures Jan 1985 after page move |
||
| Line 123: | Line 123: | ||
* [[Tandon TM100-1]] and [[Tandon TM100-2]]: the drive pages, with Tandon's figures. | * [[Tandon TM100-1]] and [[Tandon TM100-2]]: the drive pages, with Tandon's figures. | ||
* [[Apple 3.5 Drive Service Source]], [[Apple 800K Drive Service Source]], [[Apple PC 5.25 Drive Service Source]], [[Apple SuperDrive/HDI-20 Service Source]] and [[Macintosh HDI-20 1.4 MB Drive Service Source]]: Apple's symptom charts and take-apart procedures for its external drives. | * [[Apple 3.5 Drive Service Source]], [[Apple 800K Drive Service Source]], [[Apple PC 5.25 Drive Service Source]], [[Apple SuperDrive/HDI-20 Service Source]] and [[Macintosh HDI-20 1.4 MB Drive Service Source]]: Apple's symptom charts and take-apart procedures for its external drives. | ||
* [[Service Support | * [[Service Support Training Programs LaserWriter Technical Procedures Jan 1985]]: despite the title, this Apple binder also holds the DuoDisk Technical Procedures and the UniDisk 5.25 section.<ref name="duodisk" /> | ||
* [[IBM PS2 FDD Technical Reference (S42G-2194)]]: IBM's interface and programming reference for the 720 KB, 1.44 MB and 2.88 MB PS/2 drives, with the connector pin assignments. It contains no mechanical service information.<ref name="ibmfdd" /> | * [[IBM PS2 FDD Technical Reference (S42G-2194)]]: IBM's interface and programming reference for the 720 KB, 1.44 MB and 2.88 MB PS/2 drives, with the connector pin assignments. It contains no mechanical service information.<ref name="ibmfdd" /> | ||
* [[Amstrad DDI-1 / FD-1 Service Manual]]: flowcharts, alignment checks and parts lists for the 3-inch drives.<ref name="ddi1" /> | * [[Amstrad DDI-1 / FD-1 Service Manual]]: flowcharts, alignment checks and parts lists for the 3-inch drives.<ref name="ddi1" /> | ||
| Line 141: | Line 141: | ||
<ref name="tandon">Tandon Corporation, ''OEM Operating and Service Manual, TM100-1, TM100-2 Disk Drives, 48 Tracks per Inch'', part number 179022-001, July 1983: section 1 (daisy chaining; last drive terminates), Table 2-1 (300 rpm ±1.5 %), section 3 (terminator resistor pack RP1), section 5 (alignment with the Dysan 224/2A, one-hour stabilisation; 5.9 and 5.10 track 0 switch and stop; R4 speed control), section 6.1–6.4 (check supply voltages first; soft errors; head-cleaning caution; troubleshooting guide; drive belt replacement) and Appendix A (drive belt 914000-001). The manual has no lubrication instruction. Hosted as [[:File:Tandon TM100-1 TM100-2 48TPI Operating and Service Manuals 1983.pdf]].</ref> | <ref name="tandon">Tandon Corporation, ''OEM Operating and Service Manual, TM100-1, TM100-2 Disk Drives, 48 Tracks per Inch'', part number 179022-001, July 1983: section 1 (daisy chaining; last drive terminates), Table 2-1 (300 rpm ±1.5 %), section 3 (terminator resistor pack RP1), section 5 (alignment with the Dysan 224/2A, one-hour stabilisation; 5.9 and 5.10 track 0 switch and stop; R4 speed control), section 6.1–6.4 (check supply voltages first; soft errors; head-cleaning caution; troubleshooting guide; drive belt replacement) and Appendix A (drive belt 914000-001). The manual has no lubrication instruction. Hosted as [[:File:Tandon TM100-1 TM100-2 48TPI Operating and Service Manuals 1983.pdf]].</ref> | ||
<ref name="disk2tp">Apple Computer, ''Disk II Technical Procedures'' (rev. Feb 87), from ''Apple Service Technical Procedures: Apple II/Apple III Archived Products, Volume One'' (072-0231): symptom chart p. 2.3; analog card troubleshooting pp. 2.4–2.8 (gold contacts p. 2.5); DSPEED adjustment pp. 3.3–3.4; preventive maintenance pp. 4.2–4.4 (head and rails with isopropyl alcohol, "Do not use grease"; head load button; motor drive belt); parts list pp. 5.3–5.7 (belt U880-0002). Hosted as [[:File:Apple Disk II Technical Procedures.pdf]].</ref> | <ref name="disk2tp">Apple Computer, ''Disk II Technical Procedures'' (rev. Feb 87), from ''Apple Service Technical Procedures: Apple II/Apple III Archived Products, Volume One'' (072-0231): symptom chart p. 2.3; analog card troubleshooting pp. 2.4–2.8 (gold contacts p. 2.5); DSPEED adjustment pp. 3.3–3.4; preventive maintenance pp. 4.2–4.4 (head and rails with isopropyl alcohol, "Do not use grease"; head load button; motor drive belt); parts list pp. 5.3–5.7 (belt U880-0002). Hosted as [[:File:Apple Disk II Technical Procedures.pdf]].</ref> | ||
<ref name="duodisk">Apple Computer, ''DuoDisk Technical Procedures'', Section 1, Troubleshooting (rev. Aug 85), pp. 1.2 (general information; C29/C30), 1.4 (inspection of the 74LS125 and C21) and 1.5 (chip swapping chart). Bound in the Apple Service Support Training Programs binder described at [[Service Support | <ref name="duodisk">Apple Computer, ''DuoDisk Technical Procedures'', Section 1, Troubleshooting (rev. Aug 85), pp. 1.2 (general information; C29/C30), 1.4 (inspection of the 74LS125 and C21) and 1.5 (chip swapping chart). Bound in the Apple Service Support Training Programs binder described at [[Service Support Training Programs LaserWriter Technical Procedures Jan 1985]] ([[:File:Service Support Tranning Programs Laserwriter Technical Procedures Jan 1985.pdf|PDF]], PDF pp. 165–170).</ref> | ||
<ref name="mzd">minuszerodegrees.net, [https://www.minuszerodegrees.net/5150_5160/tandon_tm100/tandon_tm100-2_problems.htm "Tandon TM100-2 in IBM 5150/5155/5160 – Known Problems/Issues"], retrieved 2026-10-01. Community reference; the lubrication and head-cleaning advice is the author's own practice on the TM100-2.</ref> | <ref name="mzd">minuszerodegrees.net, [https://www.minuszerodegrees.net/5150_5160/tandon_tm100/tandon_tm100-2_problems.htm "Tandon TM100-2 in IBM 5150/5155/5160 – Known Problems/Issues"], retrieved 2026-10-01. Community reference; the lubrication and head-cleaning advice is the author's own practice on the TM100-2.</ref> | ||
<ref name="peltier">Michael G. Peltier, ''Commodore 1541 Troubleshooting & Repair Guide'', Howard W. Sams, 1986, ISBN 0-672-22470-4: section 2.2.3 (drive system, belt), p. 19; section 4 (preventive maintenance, handling and head cleaning), pp. 44–46; drive motor servo (300 rpm), p. 157. Hosted as [[Commodore 1541 Troubleshooting & Repair Guide]].</ref> | <ref name="peltier">Michael G. Peltier, ''Commodore 1541 Troubleshooting & Repair Guide'', Howard W. Sams, 1986, ISBN 0-672-22470-4: section 2.2.3 (drive system, belt), p. 19; section 4 (preventive maintenance, handling and head cleaning), pp. 44–46; drive motor servo (300 rpm), p. 157. Hosted as [[Commodore 1541 Troubleshooting & Repair Guide]].</ref> | ||