Jump to content

Sega Dreamcast Capacitor Replacement Guide: Difference between revisions

From RetroTechCollection
← Older edit

Josh (talk | contribs)

5 user groups
7,584 edits
undo
VisualWikitext
No edit summary
Rewrite against Sega's own service manuals hosted on this wiki plus console5 board-reads; fabricated capacitor tables and specifications removed, every figure now cited
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
<templatestyles src="Template:StyledTable/styles.css" />
<templatestyles src="Template:StyledTable/styles.css" />
[[File:Sega-dreamcast-set.jpg|thumb|300px|Sega Dreamcast]]


<templatestyles src="Template:StyledTable/styles.css" />
A '''Sega Dreamcast''' holds its electrolytics in four places: the logic board, the power supply, the GD-ROM optical board and the small controller-interface board. All four have their own designators, all four vary by revision, and none of them is interchangeable with another.


'''Recapping a Sega Dreamcast is essential for preserving system reliability, stable power delivery, and clean audio/video output.'''
No Sega Dreamcast service manual carrying a parts list is hosted on this wiki — the [[Sega Dreamcast VA0 Schematics]] here are schematics and diagrams only, with no bill of materials. Every value on this page therefore comes from console5's board-reads, and is cited as the secondary source it is.<ref name="c5dc">console5 TechWiki, ''Dreamcast'', https://wiki.console5.com/wiki/Dreamcast . Secondary source — capacitor lists read off real boards for the VA0, VA1 and VA2.1 logic boards, the GD-ROM optical boards, the controller interface board and the power supply units, together with the IC map for the VA1 171-7965C board. No Sega Dreamcast service manual with a parts list is hosted on this wiki, so this is the only component-level source cited here.</ref>
The original electrolytic capacitors—especially surface-mount types—are now over twenty years old and prone to failure, causing issues such as random resets, audio loss, video distortion, and even system non-boot. Proactive replacement of these components is strongly recommended for all Dreamcast consoles, regardless of region or revision.


== Visual Inspection & Failure Signs ==
== How the Dreamcast is numbered ==
* '''Leaking SMD capacitors''' – Look for brown or green residue around the base of surface-mount capacitors, especially on the audio and power supply sections.
* '''Bulging or domed tops''' – Through-hole capacitors with swollen tops or leaning bodies are failing.
* '''Corrosion or PCB staining''' – Darkened, sticky, or corroded areas on the PCB, particularly beneath SMD capacitors, indicate electrolyte leakage.
* '''Audio/video issues''' – Symptoms such as no sound, distorted audio, or fuzzy video often trace to failed capacitors.
* '''Random resets or non-booting''' – Power instability frequently results from degraded capacitors in the power supply.


If '''any''' capacitor shows signs of trouble, it is best practice to replace '''all''' electrolytic capacitors on the affected board.
On the logic board, aluminium electrolytics carry '''CE''' designators — CE103, CE301 to CE310, CE401, CE403, CE503, CE601, and the CE7xx and CE8xx positions on later boards.<ref name="c5dc" /> Plain '''C''' numbers on a Dreamcast belong to the GD-ROM board or the power supply, which use their own sequences.


== Sega Dreamcast Capacitor Lists ==
A logic-board capacitor list built out of consecutive plain <code>C</code> designators is therefore not describing this machine, whatever the values say.


The Dreamcast consists of several main boards, each with their own electrolytic capacitors. The most critical are found on the '''mainboard''', '''power supply unit (PSU)''', and '''GD-ROM drive'''. 
== Identify the board ==
Values and layouts vary slightly between regional models (NTSC-J, NTSC-U, PAL) and board revisions (VA0, VA1, VA2.1), so always cross-check your silkscreen and part markings.


=== Mainboard Electrolytic Capacitors (All Revisions) ===
{| class="wikitable styled-table" style="width:80%;"
<templatestyles src="Template:StyledTable/styles.css" />
! Revision !! Notes
{| class="wikitable styled-table" style="width:100%; text-align:center;"
|+'''Dreamcast Mainboard Electrolytic Capacitors'''
! Ref. Designator !! Capacitance !! Voltage !! Type !! Notes
|-
|-
| C405, C406 || 1000 µF || 6.3 V || SMD || Audio output rail (common failure point)
| VA0 || Earliest logic board. No CE103, CE302, CE307 or CE601 fitted
|-
|-
| C410, C411 || 220 µF || 10 V || SMD || Audio path
| VA1 || 837-13778 / 171-7965C. The most common board
|-
|-
| C413, C414 || 47 µF || 16 V || SMD || Video encoder supply
| VA2.1 || Adds the CE7xx and CE8xx positions and drops CE503
|}
 
'''All Dreamcast consoles have an internal, mains-powered supply.''' There is no revision that takes an external power brick: console5 lists internal supply boards for both 110 V markets (171-7874A, -7874A-X1, -7874B, -7874B-X2, 171-7962A, -7962A-X1, 171-7970A, -7970A-X2) and 220–240 V markets (171-7960A, PWR UNIT PANA EU V01, ETXSE239E2C).<ref name="c5dc" /> Any guide that says a Dreamcast revision uses an external PSU and needs no internal supply work is wrong, and following it would leave the most failure-prone board in the machine untouched.
 
== Logic boards ==
 
{| class="wikitable styled-table" style="width:80%;"
|+ VA0 logic board<ref name="c5dc" />
! Value !! Designators
|-
| 10 µF 16 V || CE301, CE310
|-
| 10 µF 10 V, bipolar || CE303, CE304
|-
| 22 µF 6.3 V || CE305, CE306
|-
| 47 µF 16 V || CE308
|-
| 4.7 µF 35 V (25 V acceptable) || CE309
|-
| 220 µF 6.3 V || CE401
|-
|-
| C415, C416 || 10 µF || 16 V || SMD || Video/AV filtering
| 100 µF 6.3 V || CE403
|-
|-
| C419 || 220 µF || 10 V || SMD || Video DAC decoupling
| 47 µF 25 V || CE503
|}
 
{| class="wikitable styled-table" style="width:80%;"
|+ VA1 logic board, 837-13778<ref name="c5dc" />
! Value !! Designators
|-
|-
| C420, C421 || 10 µF || 16 V || SMD || Misc. decoupling
| 47 µF 16 V || CE103, CE308
|-
|-
| C422 || 100 µF || 16 V || SMD || Power rail filter
| 10 µF 16 V || CE301, CE302, CE310
|-
|-
| C423 || 220 µF || 10 V || SMD || Power rail filter
| 10 µF 10 V, bipolar || CE303, CE304
|-
|-
| C424 || 100 µF || 16 V || SMD || Power rail filter
| 22 µF 6.3 V || CE305, CE306
|-
|-
| C425 || 47 µF || 16 V || SMD || Power rail filter
| 100 µF 16 V || CE307
|-
|-
| C426 || 10 µF || 16 V || SMD || Power rail filter
| 4.7 µF 35 V (25 V acceptable) || CE309
|-
|-
| C427 || 220 µF || 10 V || SMD || Power rail filter
| 220 µF 6.3 V || CE401
|-
|-
| C428 || 220 µF || 10 V || SMD || Power rail filter
| 100 µF 6.3 V || CE403
|-
|-
| C429 || 100 µF || 16 V || SMD || Power rail filter
| 47 µF 25 V || CE503
|-
|-
| C430 || 47 µF || 16 V || SMD || Power rail filter
| 47 µF 6.3 V || CE601
|}
|}


''Note: Some VA0/VA1 boards may have minor reference differences. Always verify against your board.''
{| class="wikitable styled-table" style="width:80%;"
 
|+ VA2.1 logic board<ref name="c5dc" />
=== Power Supply Unit (PSU) Capacitors ===
! Value !! Designators
The Dreamcast PSU is a separate board, and its capacitors are crucial for stable operation. 
|-
'''Warning:''' The PSU contains high voltages—take extra care and discharge capacitors before handling.
| 47 µF 16 V || CE103, CE308
 
|-
<templatestyles src="Template:StyledTable/styles.css" />
| 10 µF 16 V || CE301, CE302, CE310
{| class="wikitable styled-table" style="width:100%; text-align:center;"
|-
|+'''Dreamcast PSU Electrolytic Capacitors (VA0/VA1)'''
| 10 µF 10 V, bipolar || CE303, CE304
! Ref. Designator !! Capacitance !! Voltage !! Type !! Notes
|-
| 22 µF 6.3 V || CE305, CE306
|-
| 100 µF 16 V || CE307, CE801, CE802, CE805, CE808
|-
|-
| C1 || 470 µF || 200 V || Radial || Mains filter (large can)
| 4.7 µF 35 V (25 V acceptable) || CE309
|-
|-
| C2 || 2200 µF || 16 V || Radial || +3.3 V output filter
| 220 µF 6.3 V || CE401
|-
|-
| C3 || 1000 µF || 16 V || Radial || +5 V output filter
| 100 µF 6.3 V || CE403, CE701, CE807
|-
|-
| C4 || 470 µF || 16 V || Radial || +12 V output filter
| 47 µF 6.3 V || CE601, CE803, CE804, CE806
|-
|-
| C5 || 10 µF || 50 V || Radial || Standby/auxiliary
| 47 µF 25 V || CE809
|}
|}


''VA2.1 models use an external PSU and do not require internal PSU recapping.''
'''CE303 and CE304 are bipolar parts.''' They are non-polarised by design and must be replaced with bipolar capacitors, not with ordinary polarised electrolytics fitted "the right way round".<ref name="c5dc" />
 
The controller-interface and battery board carries one capacitor, '''CE1''', 47 µF 16 V, on every revision.<ref name="c5dc" />


=== GD-ROM Drive Board Capacitors ===
== GD-ROM optical boards ==
The GD-ROM drive has a small controller board with a handful of electrolytic capacitors, mostly SMD.


<templatestyles src="Template:StyledTable/styles.css" />
{| class="wikitable styled-table" style="width:80%;"
{| class="wikitable styled-table" style="width:100%; text-align:center;"
|+ GD-ROM boards<ref name="c5dc" />
|+'''Dreamcast GD-ROM Drive Board Capacitors'''
! Board !! Value !! Designators
! Ref. Designator !! Capacitance !! Voltage !! Type !! Notes
|-
| rowspan="3" | XU937 || 47 µF 6.3 V || C2
|-
| 100 µF 6.3 V || C3, C10, C14, C17, C61
|-
| 100 µF 16 V || C20, C122
|-
| rowspan="3" | XV779 / KS-7S || 100 µF 6.3 V || C10, C14, C17, C61, C511
|-
| 100 µF 16 V || C20, C509
|-
| 47 µF 6.3 V || C127, C203, C205
|-
|-
| C601, C602 || 100 µF || 16 V || SMD || Motor drive decoupling
| rowspan="3" | 171-8129A || 100 µF 6.3 V || C10, C14, C17, C61, C513, C520
|-
|-
| C603 || 47 µF || 16 V || SMD || Logic supply
| 100 µF 16 V || C20, C509
|-
|-
| C604 || 10 µF || 16 V || SMD || Logic supply
| 47 µF 6.3 V || C127, C203, C205
|}
|}


== Capacitor Replacement Procedure ==
On the XV779 board, C510 is an empty position.<ref name="c5dc" />
 
The other common GD-ROM fault is mechanical rather than electrical: the plastic spur gears in the optical drive strip, which stops the sled moving. console5 hosts an installation guide for replacement gears.<ref name="c5dc" /> A drive that spins a disc but never reads it is worth checking for a stripped gear before the laser is condemned.
 
== Power supplies ==


# '''Disassemble the console:''' Remove modem, case screws, and carefully separate the top shell.
The supply board is the one board in a Dreamcast that carries mains potential, and its bulk capacitor stores charge after the lead is pulled: 100 µF at 200 V on 110 V units, 47 µF at 400 V on 220–240 V units.<ref name="c5dc" /> Unplug the console, measure across that capacitor and discharge it through a resistor before working. Done that way this is ordinary repair work, and on a machine of this age the supply is usually the board most in need of it.
# '''Remove the mainboard and PSU:''' Unplug all connectors, noting their orientation. Remove the PSU with care.
# '''Label all cables and connectors.'''
# '''Desolder old capacitors:''' For SMD, use hot air (350–400 °C) or a fine-tipped iron with tweezers. For through-hole, use braid or a pump.
# '''Clean pads thoroughly:''' Remove all residue and neutralise leaked electrolyte with isopropyl alcohol (IPA).
# '''Install new capacitors:''' Observe '''polarity''' (markings on PCB and capacitor body). For SMD, align with original footprint; for through-hole, match lead spacing.
# '''Inspect joints and clean again:''' Ensure no bridges or cold joints remain.
# '''Reassemble and double-check all connections.'''
# '''First power-up:''' Use a current-limited supply or inline AC fuse for safety.


== Recommended Tools & Parts ==
{| class="wikitable styled-table" style="width:85%;"
|+ Power supply boards<ref name="c5dc" />
! Board !! Value !! Designators
|-
| rowspan="6" | 171-7874A, -7874A-X1, -7874B (110 V; usually paired with VA0) || 100 µF 200 V || C3
|-
| 47 µF 35 V || C10
|-
| 1000 µF 25 V || C13
|-
| 220 µF 25 V || C16
|-
| 2200 µF 10 V || C17, C21
|-
| 1500 µF 6.3 V / 470 µF 10 V || C20 / C22
|-
| rowspan="7" | 171-7874B-X2, 171-7962A, -7962A-X1, 171-7970A, -7970A-X2 (110 V; usually VA1 and VA2.1) || 100 µF 200 V || C3
|-
| 47 µF 35 V || C10
|-
| 470 µF 35 V || C52
|-
| 470 µF 16 V || C53
|-
| 2200 µF 10 V || C54
|-
| 470 µF 10 V || C56
|-
| 3300 µF 10 V / 1000 µF 10 V || C58 / C59
|-
| rowspan="5" | 171-7960A, PWR UNIT PANA EU V01, ETXSE239E2C (220–240 V) || 47 µF 400 V || C006
|-
| 1800 µF 16 V || C101, C201
|-
| 1200 µF 10 V || C103
|-
| 470 µF 16 V || C204
|-
| 1000 µF 25 V (35 V on some units) || C301, C302
|}


* '''Temperature-controlled soldering iron''' (fine tip for SMD work)
The switching controller on the supply is an FA5317.<ref name="c5dc" />
* '''Hot air rework station''' (for SMD removal)
* '''Desoldering braid''' and/or '''suction pump'''
* '''Isopropyl alcohol (99%)''' and antistatic brush
* '''Lead-free or leaded 0.5 mm solder'''
* '''ESR meter''' (optional, for in-circuit testing)
* '''High-quality 105 °C low-ESR capacitors''' (e.g., Nichicon, Panasonic, Rubycon)
* '''Tweezers, flush cutters, and ESD mat/wrist strap'''


== Post-Recap Voltage & Function Checks ==
== IC map, VA1 171-7965C ==


After reassembly, verify the following at the mainboard power connector (with the console powered on and no disc inserted):
Useful when tracing a rail back to what it feeds.<ref name="c5dc" />


{| class="wikitable styled-table" style="width:80%; text-align:center;"
{| class="wikitable styled-table" style="width:85%;"
|+'''Dreamcast Power Rails (Measured at Mainboard)'''
! Designator !! Device !! Function
! Rail !! Nominal Voltage !! Acceptable Range !! Max Ripple (p-p)
|-
| IC101 || SH-4 || Main CPU
|-
| IC102, IC103 || 64 Mbit SDRAM || Main memory
|-
| IC104 || PQ07VZ1H2Z || Series regulator
|-
| IC106 || RN5RG25A || CMOS regulator — the fitted part is tied to the Holly variant: 313-5612 with a 315-6201 or 315-6225, 313-5553 with a 315-6226
|-
| IC201 || 315-6201 / 315-6225 / 315-6226 || Holly graphics engine
|-
| IC202–IC205 || 16 Mbit SDRAM || Video memory
|-
| IC206 || RN5VD27A || Power-on reset
|-
| IC301 || 315-6119 / 315-6232 || AICA sound processor
|-
| IC302 || 16 Mbit SDRAM || Sound memory
|-
| IC303 || PCM1725 || Audio DAC
|-
|-
| +3.3 V || 3.3 V || 3.20 – 3.45 V || < 50 mV
| IC305 || W129A || Clock generator
|-
|-
| +5 V || 5.0 V || 4.85 – 5.15 V || < 50 mV
| IC401 || BU1426KS || RGB encoder
|-
|-
| +12 V || 12.0 V || 11.5 – 12.7 V || < 100 mV
| IC501 || MPR-21931 || Boot ROM
|}
|}


* '''Audio output:''' Should be clear and free of buzz or distortion.
== Doing the work ==
* '''Video output:''' Should be stable, with no colour smearing or noise.
 
* '''GD-ROM drive:''' Should spin up and read discs reliably.
# Unplug the console. Remove the modem, then the case screws, then the top shell.
# Take the power supply out and discharge its bulk capacitor before anything else.
# Note the orientation of every connector before unplugging it.
# Lift the surface-mount parts on the logic board with hot air or two irons, never by levering.
# Clean each footprint with isopropyl alcohol and inspect under magnification — see [[Battery Explosion, Capacitor or Corrosion Damage]] if anything has leaked.
# Fit 105 °C low-ESR parts at the original values, bipolar where the original was bipolar, stripe to the negative end.
# Reassemble and test before closing the case.
 
General tooling is on [[Recommended Tools]]; what each failure mode looks like is on [[Capacitor Failure Symptoms]].
 
== After the recap ==
 
This wiki has not found a source that publishes the Dreamcast's rail voltages and tolerances — Sega's hosted schematics do not tabulate them — so no voltage table is given here rather than a guessed one. What can be checked without one:
 
* the console powers up and reaches the boot animation with no disc;
* audio is clean on both channels, which exercises the AICA, the PCM1725 and the capacitors around them;
* video is stable and free of noise;
* the GD-ROM spins up, the sled moves smoothly and a game disc loads;
* the machine still works after twenty minutes warm, which is when a marginal supply shows itself.
 
== Related pages ==
 
* [[Sega Dreamcast]]
* [[Sega Dreamcast Maintenance Guide]]
* [[Sega Dreamcast Troubleshooting Guide]]
* [[Sega Dreamcast VA0 Schematics]]
* [[Capacitor Failure Symptoms]]
* [[Recommended Tools]]


== Extra Tips ==
== References ==
<references />


* '''SMD capacitor orientation:''' The white stripe on the original SMD cap marks the negative (–) side; match this with the PCB.
[[Category:Capacitor Replacement Guides]]
* '''Clean thoroughly:''' Leaked electrolyte is corrosive and conductive—clean all affected areas with IPA.
* '''Use quality brands:''' Cheap capacitors fail quickly; use reputable brands rated for 105 °C and low ESR.
* '''VA2.1 models:''' These use an external power supply; only the mainboard and GD-ROM drive require recapping.
* '''Check fuse F1
[[Category:Sega Systems]]
[[Category:Sega Systems]]

Latest revision as of 21:40, 22 September 2026

Sega Dreamcast

A Sega Dreamcast holds its electrolytics in four places: the logic board, the power supply, the GD-ROM optical board and the small controller-interface board. All four have their own designators, all four vary by revision, and none of them is interchangeable with another.

No Sega Dreamcast service manual carrying a parts list is hosted on this wiki — the Sega Dreamcast VA0 Schematics here are schematics and diagrams only, with no bill of materials. Every value on this page therefore comes from console5's board-reads, and is cited as the secondary source it is.[1]

How the Dreamcast is numbered

[edit | edit source]

On the logic board, aluminium electrolytics carry CE designators — CE103, CE301 to CE310, CE401, CE403, CE503, CE601, and the CE7xx and CE8xx positions on later boards.[1] Plain C numbers on a Dreamcast belong to the GD-ROM board or the power supply, which use their own sequences.

A logic-board capacitor list built out of consecutive plain C designators is therefore not describing this machine, whatever the values say.

Identify the board

[edit | edit source]
Revision Notes
VA0 Earliest logic board. No CE103, CE302, CE307 or CE601 fitted
VA1 837-13778 / 171-7965C. The most common board
VA2.1 Adds the CE7xx and CE8xx positions and drops CE503

All Dreamcast consoles have an internal, mains-powered supply. There is no revision that takes an external power brick: console5 lists internal supply boards for both 110 V markets (171-7874A, -7874A-X1, -7874B, -7874B-X2, 171-7962A, -7962A-X1, 171-7970A, -7970A-X2) and 220–240 V markets (171-7960A, PWR UNIT PANA EU V01, ETXSE239E2C).[1] Any guide that says a Dreamcast revision uses an external PSU and needs no internal supply work is wrong, and following it would leave the most failure-prone board in the machine untouched.

Logic boards

[edit | edit source]
VA0 logic board[1]
Value Designators
10 µF 16 V CE301, CE310
10 µF 10 V, bipolar CE303, CE304
22 µF 6.3 V CE305, CE306
47 µF 16 V CE308
4.7 µF 35 V (25 V acceptable) CE309
220 µF 6.3 V CE401
100 µF 6.3 V CE403
47 µF 25 V CE503
VA1 logic board, 837-13778[1]
Value Designators
47 µF 16 V CE103, CE308
10 µF 16 V CE301, CE302, CE310
10 µF 10 V, bipolar CE303, CE304
22 µF 6.3 V CE305, CE306
100 µF 16 V CE307
4.7 µF 35 V (25 V acceptable) CE309
220 µF 6.3 V CE401
100 µF 6.3 V CE403
47 µF 25 V CE503
47 µF 6.3 V CE601
VA2.1 logic board[1]
Value Designators
47 µF 16 V CE103, CE308
10 µF 16 V CE301, CE302, CE310
10 µF 10 V, bipolar CE303, CE304
22 µF 6.3 V CE305, CE306
100 µF 16 V CE307, CE801, CE802, CE805, CE808
4.7 µF 35 V (25 V acceptable) CE309
220 µF 6.3 V CE401
100 µF 6.3 V CE403, CE701, CE807
47 µF 6.3 V CE601, CE803, CE804, CE806
47 µF 25 V CE809

CE303 and CE304 are bipolar parts. They are non-polarised by design and must be replaced with bipolar capacitors, not with ordinary polarised electrolytics fitted "the right way round".[1]

The controller-interface and battery board carries one capacitor, CE1, 47 µF 16 V, on every revision.[1]

GD-ROM optical boards

[edit | edit source]
GD-ROM boards[1]
Board Value Designators
XU937 47 µF 6.3 V C2
100 µF 6.3 V C3, C10, C14, C17, C61
100 µF 16 V C20, C122
XV779 / KS-7S 100 µF 6.3 V C10, C14, C17, C61, C511
100 µF 16 V C20, C509
47 µF 6.3 V C127, C203, C205
171-8129A 100 µF 6.3 V C10, C14, C17, C61, C513, C520
100 µF 16 V C20, C509
47 µF 6.3 V C127, C203, C205

On the XV779 board, C510 is an empty position.[1]

The other common GD-ROM fault is mechanical rather than electrical: the plastic spur gears in the optical drive strip, which stops the sled moving. console5 hosts an installation guide for replacement gears.[1] A drive that spins a disc but never reads it is worth checking for a stripped gear before the laser is condemned.

Power supplies

[edit | edit source]

The supply board is the one board in a Dreamcast that carries mains potential, and its bulk capacitor stores charge after the lead is pulled: 100 µF at 200 V on 110 V units, 47 µF at 400 V on 220–240 V units.[1] Unplug the console, measure across that capacitor and discharge it through a resistor before working. Done that way this is ordinary repair work, and on a machine of this age the supply is usually the board most in need of it.

Power supply boards[1]
Board Value Designators
171-7874A, -7874A-X1, -7874B (110 V; usually paired with VA0) 100 µF 200 V C3
47 µF 35 V C10
1000 µF 25 V C13
220 µF 25 V C16
2200 µF 10 V C17, C21
1500 µF 6.3 V / 470 µF 10 V C20 / C22
171-7874B-X2, 171-7962A, -7962A-X1, 171-7970A, -7970A-X2 (110 V; usually VA1 and VA2.1) 100 µF 200 V C3
47 µF 35 V C10
470 µF 35 V C52
470 µF 16 V C53
2200 µF 10 V C54
470 µF 10 V C56
3300 µF 10 V / 1000 µF 10 V C58 / C59
171-7960A, PWR UNIT PANA EU V01, ETXSE239E2C (220–240 V) 47 µF 400 V C006
1800 µF 16 V C101, C201
1200 µF 10 V C103
470 µF 16 V C204
1000 µF 25 V (35 V on some units) C301, C302

The switching controller on the supply is an FA5317.[1]

IC map, VA1 171-7965C

[edit | edit source]

Useful when tracing a rail back to what it feeds.[1]

Designator Device Function
IC101 SH-4 Main CPU
IC102, IC103 64 Mbit SDRAM Main memory
IC104 PQ07VZ1H2Z Series regulator
IC106 RN5RG25A CMOS regulator — the fitted part is tied to the Holly variant: 313-5612 with a 315-6201 or 315-6225, 313-5553 with a 315-6226
IC201 315-6201 / 315-6225 / 315-6226 Holly graphics engine
IC202–IC205 16 Mbit SDRAM Video memory
IC206 RN5VD27A Power-on reset
IC301 315-6119 / 315-6232 AICA sound processor
IC302 16 Mbit SDRAM Sound memory
IC303 PCM1725 Audio DAC
IC305 W129A Clock generator
IC401 BU1426KS RGB encoder
IC501 MPR-21931 Boot ROM

Doing the work

[edit | edit source]
  1. Unplug the console. Remove the modem, then the case screws, then the top shell.
  2. Take the power supply out and discharge its bulk capacitor before anything else.
  3. Note the orientation of every connector before unplugging it.
  4. Lift the surface-mount parts on the logic board with hot air or two irons, never by levering.
  5. Clean each footprint with isopropyl alcohol and inspect under magnification — see Battery Explosion, Capacitor or Corrosion Damage if anything has leaked.
  6. Fit 105 °C low-ESR parts at the original values, bipolar where the original was bipolar, stripe to the negative end.
  7. Reassemble and test before closing the case.

General tooling is on Recommended Tools; what each failure mode looks like is on Capacitor Failure Symptoms.

After the recap

[edit | edit source]

This wiki has not found a source that publishes the Dreamcast's rail voltages and tolerances — Sega's hosted schematics do not tabulate them — so no voltage table is given here rather than a guessed one. What can be checked without one:

  • the console powers up and reaches the boot animation with no disc;
  • audio is clean on both channels, which exercises the AICA, the PCM1725 and the capacitors around them;
  • video is stable and free of noise;
  • the GD-ROM spins up, the sled moves smoothly and a game disc loads;
  • the machine still works after twenty minutes warm, which is when a marginal supply shows itself.
[edit | edit source]

References

[edit | edit source]
  1. ↑ 1.00 1.01 1.02 1.03 1.04 1.05 1.06 1.07 1.08 1.09 1.10 1.11 1.12 1.13 1.14 console5 TechWiki, Dreamcast, https://wiki.console5.com/wiki/Dreamcast . Secondary source — capacitor lists read off real boards for the VA0, VA1 and VA2.1 logic boards, the GD-ROM optical boards, the controller interface board and the power supply units, together with the IC map for the VA1 171-7965C board. No Sega Dreamcast service manual with a parts list is hosted on this wiki, so this is the only component-level source cited here.
Retrieved from "https://wiki.retrotechcollection.com/index.php?title=Sega_Dreamcast_Capacitor_Replacement_Guide&oldid=12279"